The filter press uses a special filter medium to apply a certain pressure to the object, so that a mechanical device that oozes out the liquid is a commonly used solid-liquid separation device. It was used in chemical production in the early 18th century and is still widely used in chemical, pharmaceutical, metallurgical, dye, food, brewing, ceramics and environmental protection industries. The reason why the filter press is abnormal when it is used, let's take a look! The filter press uses a special filter medium to apply a certain pressure to the object, so that a mechanical device that oozes out the liquid is a commonly used solid-liquid separation device. It was used in chemical production in the early 18th century and is still widely used in chemical, pharmaceutical, metallurgical, dye, food, brewing, ceramics and environmental protection industries.

The filter plate has stable performance, convenient operation, safety and labor saving; the metal press tube is processed by seamless steel pipe and plastic steel filter plate, which is resistant to high temperature, high pressure and durable.

1. The motor of the filter press is aging, and the load of the load has made the equipment unbearable;

2, the high pressure oil pump damage, the pressure oil pump is usually a plunger pump, if the hydraulic oil is abnormal or the age is relatively long, it will cause damage to the plunger;

3. When the hydraulic station is installed, there will be some differences in the coupling. If the coupling is pressed incorrectly, the motor will swing too much and the load will increase.

The above three aspects are the reasons for the abnormal sound of the filter press. I hope that the content mentioned in Xiaobian today can make everyone pay attention to the equipment!