The belt filter press is a good solid-liquid separation equipment. As a supporting equipment for sewage treatment, the equipment can filter the suspended solids and sediment after air flotation and the sludge produced by each chemical section in sewage treatment. Dehydration is pressed into a mud cake to achieve the purpose of preventing secondary pollution.

It is very important to carry out the corresponding cleaning work on the equipment during the use of the belt filter press, mainly to keep the equipment more efficient during use. At the same time, it can better maintain the equipment, extend its service life and improve work efficiency. I hope that everyone can have a better understanding of this, then how to do the filter belt cleaning work for the belt filter press? Our technical staff summed up some knowledge for you and hope to help you.

In the process of cleaning the filter belt, we often encounter the problem that the cleaning is not clean. When encountering such a problem, we need to analyze the cause simply, what is the situation that leads to such a phenomenon, generally In fact, it may be caused by insufficient water pressure. At this time, we can replace the pump model accordingly, and use a large flow nozzle to clean the filter belt, which will often have a better effect. In addition, the sludge residue of the machine is serious and there is no way to clean it well. This requires us to do a good job with a certain cleaning agent.